Wilton Cupola - Octagon Window Cupola

Introducing the breathtaking Wilton Color Cupola, a masterpiece of craftsmanship and elegance that will elevate the look of any building to new heights. With its octagon shape and bell-style roof, this cupola exudes timeless charm and sophistication. The windows feature double-strength glass, ensuring durability and allowing natural light to illuminate your space with enchanting warmth.

Cupola Product Information

Product Information: PVC Color Cupola made from Evolve Color Lumber

Cupola available sizes - 24", 30", 36", 42" 49", 60", 72" // Roof used for measurements

Board Size: 3/4" Material is PVC ( Brand Name Evolve Lumber)

Cupola Color Metal Roofing: Made by Galvalume, Galvalume is 55% Aluminum -45% Zinc coated Sheet product that is ideally suited for most types of roofing. The metal sheet is heat-formed to prevent microscopic cracking and the rust preventing paint coating as the panel is formed. This makes for a long lasting finish.

Note: Cupola Metal Roof Colors as as close as possible to actual colors: color shown may vary slightly from actual metal.

This cupola is available in maintenance-free vinyl color lumber by Evolve Lumber and is weathervane ready with a 3/4 inch rod opening. Designed for up to a 8/12 pitch. Cupola roof is covered with standing seam copper or metal roofing is available.

Cupola Roof used for measurements, Octagon Cupolas are measured from the largest part of the cupola roof which is the flat to flat on this style of cupola. ( Window Cupolas are not designed for Skylights)

Made with Double Strength Single Pane Glass and Easy Access Panel for Light Changes

Cupola Dimensions: (approx)

24" Cupola Dimensions - 24" Roof - 43" High

30" Cupola Dimensions - 30" Roof - 52" High

36" Cupola Dimensions - 36" Roof - 60" High

42" Cupola Dimensions - 42" Roof - 67" High

48" Cupola Dimensions - 48" Roof - 75" High

60" Cupola Dimensions - 60" Roof - 89" High

72" Cupola Dimensions - 72" Roof - 104" High

Special Note: All cupolas are made to order. Cupolas are constructed in a 3 section design for ease of handing and installation

Weathervanes sold separately.

• Cupola Base Extensions are for 9/12 up to 12/12 pitched roof lines.
•  
• The cupola comes weathervane ready with a 3/4" opening. Roof mounts are not needed if using a cupola.
• Customers can request the weathervane opening be capped. For using the cupola without a weathervane.
• The louver cupolas can be used for venting, be sure and have your carpenter flash around base to keep the water and moisture out. Window cupolas are not used for venting.
• If not used for venting, the cupola can go right over the shingles.
• It is the customer’s responsibility to cut the roof pitch into the cupola base to ensure proper fit.
• This Cupola is made from Evolve Color PVC Lumber